Precor is committed to achieving Level AA conformance with the Web Content Accessibility Guidelines (WCAG) 2.0 and achieving compliance with other accessibility standards. Please contact Customer Service at 1-800-786-8404, if you have any issues accessing information on this website.
407B Adjustable Cable Crossover
The 407B Adjustable Cable Crossover is a stand-alone cable crossover machine with two adjustable high/low pulley stations and a connector that offers dual chin-up bar options. The Crossover adjusts quickly to give users a wide range of exercise options.
Details Specifications
Equipment Features
Bearings and Pivot Points
Oversized linear reticulating ball bearings are self-aligning, sealed and running on casehardened shafts.
Pivot Points and Joints
Pillow block or flange-mount motor-grade rotary bearings or sleeve bearings utilizing either oil-impregnated bronze bushings or pre-lubricated Igus nylon bushings.
Pulleys and Cables
Glass-fiber-reinforced nylon pulleys with precision motor-grade ball bearings.
3/16-inch (7x19) aircraft cable coated with black pressure-extruded nylon to 1/4 inch or 1/8 inch coated to 3/16 inch. The cable will conform to specification MIL-W-83420D-BARE cable only. Attachments are climbing-rated carabiner design.
Frame and Finish
11 gauge (.120") and 7 gauge (.188") 2x4-inch bent electroweld steel tubing. Minimum of 3 standard bolt tabs on appropriate units. Abrasive grit pre-finish is followed by electrostatically applied, heat-cured powder coat.
Guide Rods
Guide rods are precision centerless ground, polished, with corrosion-resistant plating for smooth operation and retardation of rust.
Selector Plates
Each selector plate entirely precision machined on all surfaces. Top plate has replaceable Igus precision self-lubricating bushings. Black painted protective finish.
Weight Stack
On most selectorized units, the weight stack is elevated 5 inches to facilitate user pin selection from seated position.
Upholstery
Premium-quality upholstery with Beautyguard protective topcoat finish. Fabric meets or exceeds California fire regulations (Bulletin 117, section E). Double-layer slipcover in appropriate high wear areas. Double stitching on all seams.
Bolts
Grade 5 black zinc in most applications.
Cable Routing
Wherever possible, redirection pulleys are used to route cables close to frame to minimize chance of external interference.
Handles
Slip-resistant rubber sleeve with machined alloy end-cap.
Equipment Specifications
Weight Stacks
150 lb / 68 kg
Weight Stack Heavy (kg/lb)
200 lb / 91 kg
Options
Rubber Feet
Standard Shroud
Standard Upholstery Colours
All Spice
Standard Frame Colours
Gloss Metallic Silver
Equipment Dimensions & Weight
Length
176 inches / 447 cm
Width
43 inches / 109 cm
Height
91 inches / 231 cm
Equipment Weight
870 lb / 396 kg
Warranty & Service
Brochures and Manuals
Select a brochure or manual for more product information.
Get a Quote
Contact Precor Sales and get a personalised quote today.
Get Quote
