Precor is committed to achieving Level AA conformance with the Web Content Accessibility Guidelines (WCAG) 2.0 and achieving compliance with other accessibility standards. Please contact Customer Service at 1-800-786-8404, if you have any issues accessing information on this website.
C025ES Bicep Curl/Tricep Extension
The Vitality Series Dual Bicep Curl/Tricep Extension features a combination auto-adjust bicep/tricep grip and convenient start position adjustment while seated on the machine. Single seat adjustment ratchets for proper exercise positioning and optimal comfort. Users can easily engage the add-on weight with a simple push of a lever to increase the work load.
Features
The movement arm is designed to ensure that a smooth resistance is felt through the entire range of motion, eliminating common dead spots found in similar machines.
Adjustable Start Position
The start position is easily adjusted while the user is sitting in the unit, allowing them to get moving faster.
The counter-balanced movement arm creates a proper motion path and low starting lift weight.
Details Specifications
Equipment Features
Adjustments
Seat pad adjustment features custom-molded sleeve-tube inserts inside attractive oval-shaped steel tubing. Ensures stable, low-friction seat adjustments. Ratcheting seat adjustment with push-to-release lever is color-coded for easy identification. Viewing hold and etched numbers on sleeve-tube for accurate positioning of seat and back pad. Hardened plunger and spring-loaded snap-pin assembly position adjustment with easy-grip pull-pin for smooth adjustment. Pull-pin is yellow color-coded for easy identification. Slip-resistant rubber grip handle assembly with machine alloy end-cap. Push grips are over-sized to 1.5 inch (39 mm) diameter. Pull grips and handlebars are 1.25 inch (32 mm) diameter.
Bearings and Pivot Points
ABEC-rated bearings for added durability and smooth feel. Size 4 1/2 inch (11 mm). Axles are 25 mm (1 inch) solid steel pivot axles with oil-impregnated bronze bushings for precise alignment and frictionless movement. Pillow block ABEC-grade rotary bearings with grease certs on machines with a cam assembly (Bicep Curl, Tricep Extension, Leg Extension, Leg Curl, Abdominal and Back Extension).
Pulleys and Cables
Glass-fiber-reinforced nylon pulleys with deep V-groove provide secure cable seating and fluid bearing rotation.
Frame and Finish
11 gauge (2.75 mm) 2x4-inch (50 x 100 mm) tubing is bent electroweld steel. Finish is electrostatically applied, heat-cured powder coat for superior durability. Frame available in Experience Titanium (metallic industry silver).
Water Bottle and Accessories Holder
Top cap secures the front and back shrouds and includes an accessories shelf and 4 inch (102 mm) diameter water bottle holder.
Instructional placard
Simple step-by-step instructions for users of all levels to help with setup and exercise, including tips to help maximize workouts.
Weight Stack
Weight plates are 1 inch (25 mm) thick, machined cast weight plates in 10 lb (5 kg) and 15 lb (7 kg) sizes, with fitted nylon bushings to ensure smooth travel on guide rods.Top weight plate is machined cast weight plate designed for a 10 lb (5 kg) starting weight (25 lb / 11 kg on the Leg Press). Precision, lubricated bushings for smooth operation. The magnetic weight selection pin assures positive locking to plates and is secured to weight stack with a thick plastic-coated tether cable. Weight selection pin is color-coded for easy identification. Guide rods are 3/4 inch (19 mm) diameter steel, polished with corrosion-resistant plating for smooth operation and rust prevention. Cables are military spec 5 mm cable (Leg Press: 6.3 mm) coated. Custom end fittings tested to 250,000 cycles under a 4440 lb (200 kg) load. Six machines require no removal of pulleys to route cable. For the other 7 machines all pulleys are pre-assembled, so removal, routing and replacing the pulleys is easy - no hunting for the right pulleys, pulley cover and pulley-mounting hardware. Low starting weight and full weight range accommodate a wide range of users. Weight stack is easily accessible from the seated position. Full-length translucent shrouds enclose the back of the weight stack. Front shroud is full-length with a 3 inch (75 mm) wide slot for access to the weight selection pin. Slotted front shroud meets ASTM and EN0957 safety standards.
Upholstery
Fabric is premium-quality industrial vinyl with a protective coating that results in long-lasting, easy-to-clean upholstery pads and rollers. Fabric meets or exceeds California fire regulations (Bulletin 117, section E). Construction features a 4-piece design with a 3/4 inch thick plywood back, 3/4 inch high-density foam base, 3/4 inch high-density foam core and industrial fabric cover. Total thickness is 2.5 inches (65 mm).
Rubber Feet
Yes
Accessory Holder(s)
Yes
General Features
Two machines in one: bicep curl and tricep extension. Preacher curl position with auto-adjust hand grips to fit all users. Ratcheting, adjustable seat for proper positioning. Weight Stack 170 lb (78 kg) with 5 lb add-on system.
Equipment Specifications
Optional Upholstery Colours
All Spice
Standard Shroud Colour
Translucent
Incremental Add-on Weight
2.5 kg
Weight Stack (kg/lb)
78 kg
Standard Upholstery Colours
Black
Workout Area (L x W)
160 x 110 cm
Standard Frame Colours
Experience Titanium
Equipment Dimensions & Weight
Length
132 cm
Width
109 cm
Height
155 cm
Equipment Weight
200 kg
Delivery Dimensions & Weight
Length
154 cm
Width
90 cm
Height
88 cm
Delivery Weight
200 kg
Warranty & Service
Brochures and Manuals
Select a brochure or manual for more product information.
Get a Quote
Contact Precor Sales and get a personalised quote today.
Get Quote
